Your shopping cart is currently empty.
Generators
** Please contact us to check current availability.
Specifications:
General Data
- Surge Power: 50KW / 62.5 KVA
- Stand-By Power: 40KW / 50KVA
- Frequency / Hz.: 1800 RPM / 60 3-Phase
- Voltage: 120/208
- Current: 139a
- Connection: 3P 4W Series
- Rated Power Factor: 0.8pf
- Open Type（L×W×H）: 69.05in x 25.78in x 42.59
- Open Type(Weight): 1340 lbs
- Silent Type（L×W×H）: 90.55in x 43.30in x 45.66in
- Silent Type(Weight): 3086 lbs
Standard Configuration
- Engine: Deutz Diesel Engine, to include air filter, fuel filters, oil filter, starting motor and charging Alternator
- Alternator: YANAN or Mecc Alte Brushless AC alternator with YA440 or SR7 AVR
- Radiator: 50˚, fan with protective shroud
- Base frame: Base mounted , fuel meter, rubber anti-vibration pads, battery holder, steel frame
- Circuit Breaker Engine: Molded case circuit breaker (MLCB) **
- Control System Start: DYNA GEN TG410 Controller
- Battery: Lead-acid battery, connection cables
- Exhaust System: Flex exhaust, Elbow and flange, Exhaust silencer, etc.
- Documents: Yanan USA standard, Mechanical drawing, electric drawing, operation & maintenance manual, certifications ECT.
Show More Specifications
Optional Available Equipment
- Engine accessories:
- Heavy-duty air filter
- Coolant heater
- Lube oil heater
- Fuel and Water Separator
- Cooling system
- 50˚C radiator
- Heat exchanger + water cooling tower + External water circulation pumping system + Remote horizontal water tank system
- Control System: Other Deep Sea Controls Inc
- Circuit Breaker: ABB 2, 3 and 4 pole thermo-magnetic
- Automatic Transfer Switch: ATS- available in Nema 1 and 3R, 2 and 3 pole
- Optional Fuel Tank: UL142 listed double wall tank available in 8, 12, and 24 hour sizes
Engine Data
- Model: DEUTZ TD2.9
- Aspiration: Turbocharged
- Type: In line
- No. of Cylinders: 4-4 Cycle
- Governor Type: Isochronous Governor ECM controlled
- Engine power: 57 kW
- Displacement: 2.9 L
- Bore×Stroke: 3.62x4.33 in
- Compression Ratio: 18.2:1
- Rated Speed: 1800 RPM
Fuel System
- Prime Power Fuel Consumption @ 100%: 3.1 IGPH
- Fuel: Diesel #2
- Standby Power Fuel Consumption @ 75%: 2.5 - GPH
- Injection System: Highpressure common rail
Lubrication System;
- Oil Capacity: 3.4 G
- Lube #: API-CF 15w40
Coolant System
- Coolant Capacity: 4.1 G
- Thermostat range: 85-95 ˚C
- Max Top Tank Temp: 112 ˚C
- Fan air flow: 154m3/m
- Fan Drive Type: Shaft Drive
Air Intake System;
- Air intake capacity: 8.4 m3/m3
- Air Pressure: ≦ 3 KPA
Exhaust System
- Exhaust Gas Flow: 22.1 m3/min
- Max Back Pressure: 10.2 kPa
- Exhaust gas temp: 480
- Outlet size: 72mm-3\"
Starting System;
- Start Mode: Electric start
- Battery: 120 Ah
Alternator Data
- Alternator Model: MECC ALTE ECP32
- PF: 0.8
- Phase: 3
- Connection: 3P 4W，Y connection
- Winding Pitch: 2/3
- Insulation Class: H/H
- Tel. Influence: TIF: <50 THF: >
- Harmonic: 2%
- Coefficient Voltage: ≥±5%
- Adjust Scope
- Rate Power: 53/66.5 kW/kVA
- Voltage: 208/120 V
- Frequency: 60 Hz
- Bearing: Single Bearing
- Protection Class: IP21
- Efficiency: 85.80%
- Voltage: ±1.0%
- Regulation AVR: SR7-2G
- Excitation: Self-excited
Control Panel features - Model TG410
Electronic J1939 (CAN) and Modbus capable. MPU and alternator sensing engine support for diesel, and gas engines all in one controller. With a large number of flexible inputs, outputs and protection circuits. The modules can be easily adapted to suit a wide range of applications.
- Utility voltage sensing
- Generator/load power monitoring - (kW, kVA, kVAR, pf)
- Generator overload protection (kW)
- Efficient power save mode
- Mains and generator closed via front panel
- 4 Configurable DC outputs
- 4 Configurable analog/digital inputs & stopping
- 6 Configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading
- CAN, MPU and alternator speed sensing in one variant
- 3 Engine maintenance
- Engine speed protection
- Engine pre-heat
- Multiple date and time scheduler
- Engine idle control for starting
- Fuel pump control
- Battery voltage monitoring
- Start on low battery voltage output
- Configurable remote start input
- Alternative configuration
- Alarm including common alarm, common electric and common shutdown
- LCD and LED alarm indication
- Configurable event log (50)
- Heated display option available
Warranty Policy
1. Standard warranty for Three years or 3000 hours (whichever comes first) from initialsales date to the end user. Refer to Intech Equipment Power Diesel Generator WarrantyManual for more details.
2. Maintenance parts (filters, belts, hoses, batteries), improper operation andmaintenance failures are excluded from the warranty policy.
- Open Unit Size (LXWXH)
- Enclosed unit (LXWXH)
- Weight Open unit
- Weight Enclosed unit 69.05 x 25.78 x 42.59 in
- 90.55 x 43.30 x 45.66 in
- 608kg (1340lbs)
- 1400kg (3086lbs)
![\"\"](\"https://www.intechequipment.com/store/images/generator/gen_dims.JPG\")
All informtion, on this page including pricing can change without notice. Please contact Intech Equipment with any questions.
We are excited to enter the Tier IV Final market! Our DE23 has new features, such as a standard DSE7310 controller, the new Isuzu 4LE2T series engine, service access on one side, Electronic Common Rail, and radiator ducting, to name a few.
Isuzu 4LE2T 2.2 Liter Engine- Dependable 4 cylinder, 1800 RPM engine.
- EPA compliant, tier 4 final.
- Our digital controller is powerful and dynamic with a user-friendly interface.
- Alternators built to produce clean power for industrial applications.
- Factory installed 3 stage, 2 Amp battery charger.
- In-line Kim Hotstart, 120V, block heater with thermostat.
- A smart trickle battery charger comes standard.
- Provides a durable, long lasting finish.
- A safety standard for the design, construction, and performance of stationary generators.
- We load test every generator before it leaves our factory.
Additional Information
Standby Watts:
- 120/240 1-PH: 20,000
- 120/208 3-PH: 23,000
- 120/240 3-PH: 23,000
- 277/480 3-PH: 23,000
Prime Watts:
- 120/240 1-PH: 19,800
- 120/208 3-PH: 20,700
- 120/240 3-PH: 20,700
- 277/480 3-PH: 20,700
Voltage Output:
- 120/208 Volt Three Phase
- 120/240 Volt Single Phase
- 120/240 Volt Three Phase
- 277/480 Volt Three Phase
Standby Amps:
- 120/240 1-PH: 91
- 120/208 3-PH: 79
- 120/240 3-PH: 69
- 277/480 3-PH: 34
Prime Amps:
- 120/240 1-PH: 82
- 120/208 1-PH: 71
- 120/240 3-PH: 62
- 277/480 3-PH: 31
General Info:
- Voltage Regulation: AVR – AS440 +/- 1%
- Brand: Isuzu
- Model: 4LE2T
- Dimensions: 66.7\" x 33.6\" x 43.4\"
- Weight: 1,700 lbs
- Unit Warranty: 1 year/2000 hours
- Assembled In: USA
** Please contact us to check current availability.
Specifications:
General Data
- Surge Power: 50KW / 62.5 KVA
- Stand-By Power: 45KW / 58.2KVA
- Frequency / Hz.: 1800 RPM / 60 3-Phase
- Voltage: 120/208
- Current: 156a
- Connection: 3P 4W Series
- Rated Power Factor: 0.8pf
- Open Type（L×W×H）: 69.05in x 25.78in x 42.59
- Open Type(Weight): 1340 lbs
- Silent Type（L×W×H）: 90.55in x 43.30in x 45.66in
- Silent Type(Weight): 3086 lbs
Standard Configuration
- Engine: Deutz Diesel Engine, to include air filter, fuel filters, oil filter, starting motor and charging Alternator
- Alternator: YANAN or Mecc Alte Brushless AC alternator with YA440 or SR7 AVR
- Radiator: 50˚, fan with protective shroud
- Base frame: Base mounted , fuel meter, rubber anti-vibration pads, battery holder, steel frame
- Circuit Breaker Engine: Molded case circuit breaker (MLCB) **
- Control System Start: DYNA GEN TG410 Controller
- Battery: Lead-acid battery, connection cables
- Exhaust System: Flex exhaust, Elbow and flange, Exhaust silencer, etc.
- Documents: Yanan USA standard, Mechanical drawing, electric drawing, operation & maintenance manual, certifications ECT.
Show More Specifications
Optional Available Equipment
- Engine accessories:
- Heavy-duty air filter
- Coolant heater
- Lube oil heater
- Fuel and Water Separator
- Cooling system
- 50˚C radiator
- Heat exchanger + water cooling tower + External water circulation pumping system + Remote horizontal water tank system
- Control System: Other Deep Sea Controls Inc
- Circuit Breaker: ABB 2, 3 and 4 pole thermo-magnetic
- Automatic Transfer Switch: ATS- available in Nema 1 and 3R, 2 and 3 pole
- Optional Fuel Tank: UL142 listed double wall tank available in 8, 12, and 24 hour sizes
Engine Data
- Model: DEUTZ TD2.9
- Aspiration: Turbocharged
- Type: In line
- No. of Cylinders: 4-4 Cycle
- Governor Type: Isochronous Governor ECM controlled
- Engine power: 57 kW
- Displacement: 2.9 L
- Bore×Stroke: 3.62x4.33 in
- Compression Ratio: 18.2:1
- Rated Speed: 1800 RPM
Fuel System
- Prime Power Fuel Consumption @ 100%: 3.1 IGPH
- Fuel: Diesel #2
- Standby Power Fuel Consumption @ 75%: 2.5 - GPH
- Injection System: Highpressure common rail
Lubrication System;
- Oil Capacity: 3.4 G
- Lube #: API-CF 15w40
Coolant System
- Coolant Capacity: 4.1 G
- Thermostat range: 85-95 ˚C
- Max Top Tank Temp: 112 ˚C
- Fan air flow: 154m3/m
- Fan Drive Type: Shaft Drive
Air Intake System;
- Air intake capacity: 8.4 m3/m3
- Air Pressure: ≦ 3 KPA
Exhaust System
- Exhaust Gas Flow: 22.1 m3/min
- Max Back Pressure: 10.2 kPa
- Exhaust gas temp: 480
- Outlet size: 72mm-3\"
Starting System;
- Start Mode: Electric start
- Battery: 120 Ah
Alternator Data
- Alternator Model: MECC ALTE ECP32
- PF: 0.8
- Phase: 3
- Connection: 3P 4W，Y connection
- Winding Pitch: 2/3
- Insulation Class: H/H
- Tel. Influence: TIF: <50 THF: >
- Harmonic: 2%
- Coefficient Voltage: ≥±5%
- Adjust Scope
- Rate Power: 53/66.5 kW/kVA
- Voltage: 208/120 V
- Frequency: 60 Hz
- Bearing: Single Bearing
- Protection Class: IP21
- Efficiency: 85.80%
- Voltage: ±1.0%
- Regulation AVR: SR7-2G
- Excitation: Self-excited
Control Panel features - Model TG410
Electronic J1939 (CAN) and Modbus capable. MPU and alternator sensing engine support for diesel, and gas engines all in one controller. With a large number of flexible inputs, outputs and protection circuits. The modules can be easily adapted to suit a wide range of applications.
- Utility voltage sensing
- Generator/load power monitoring - (kW, kVA, kVAR, pf)
- Generator overload protection (kW)
- Efficient power save mode
- Mains and generator closed via front panel
- 4 Configurable DC outputs
- 4 Configurable analog/digital inputs & stopping
- 6 Configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading
- CAN, MPU and alternator speed sensing in one variant
- 3 Engine maintenance
- Engine speed protection
- Engine pre-heat
- Multiple date and time scheduler
- Engine idle control for starting
- Fuel pump control
- Battery voltage monitoring
- Start on low battery voltage output
- Configurable remote start input
- Alternative configuration
- Alarm including common alarm, common electric and common shutdown
- LCD and LED alarm indication
- Configurable event log (50)
- Heated display option available
Warranty Policy
1. Standard warranty for Three years or 3000 hours (whichever comes first) from initialsales date to the end user. Refer to Intech Equipment Power Diesel Generator WarrantyManual for more details.
2. Maintenance parts (filters, belts, hoses, batteries), improper operation andmaintenance failures are excluded from the warranty policy.
- Open Unit Size (LXWXH)
- Enclosed unit (LXWXH)
- Weight Open unit
- Weight Enclosed unit 69.05 x 25.78 x 42.59 in
- 90.55 x 43.30 x 45.66 in
- 608kg (1340lbs)
- 1400kg (3086lbs)
All informtion, on this page including pricing can change without notice. Please contact Intech Equipment with any questions.
- Isuzu 4LE2X 2.2 Liter Engine
- Dependable 4 cylinder, 1800 RPM engine.
- EPA compliant, tier 4 final.
- Cummins Industrial Generator End
- With automatic voltage regulation.
- Electronic Common Rail
- Excellent frequency control and load pick-up.
- Radiator Ducting
- Allowing you to get the unit closer to your venting system, making your installation easier and helps reduce air recirculation.
- Fork Pockets
- Convenient fork pockets integrated into the unit, giving you the ability to lift from all directions
- Starting Battery Included
- 12V Group 24 650 CCA Battery
- Battery Charger
- A smart trickle battery charger comes standard.
- DSE7310 Controller
- Digital controller allows for remote start, engine code reader, with advanced metering, safeties and shutdowns to protect your investment.
Standby Watts:
- 120/240 1-PH: 36,000
- 120/208 3-PH: 39,000
- 120/240 3-PH: 39,000
- 277/480 3-PH: 39,000
- 346/600 3-PH: 39,000
Prime Watts:
- 120/240 1-PH: 32,400
- 120/208 3-PH: 35,100
- 120/240 3-PH: 35,100
- 277/480 3-PH: 35,100
- 346/480 3-PH: 35,100
Voltage Output:
- 120/208 Volt Three Phase
- 120/240 Volt Single Phase
- 120/240 Volt Three Phase
- 277/480 Volt Three Phase
- 346/600 Volt Three Phase
Standby Amps:
- 120/240 1-PH: 150
- 120/208 3-PH: 135
- 120/240 3-PH: 117
- 277/480 3-PH: 58
- 346/600 3-PH: 47
Prime Amps:
- 120/240 1-PH: 135
- 120/208 1-PH: 122
- 120/240 3-PH: 105
- 277/480 3-PH: 52
- 346/600 3-PH: 42
General Info:
- Voltage Regulation: AVR – AS440 +/- 1%
- Engine Brand: Isuzu
- Engine Model: 4LE2X
- Emissions: EPA Prime
- Dimensions: 63\" x 33\" x 43\"
- Weight: 1825 lbs (w/ fuel tank)
- Weight: 1625 lbs (no fuel tank)
- Unit Warranty: 1 year/2000 hours
- Assembled In: USA
Generators for Commercial, Industrial and Contractor Use
We stock a full range of generators for sale, built for commercial and industrial applications. Our inventory includes portable generators for jobsites, stationary units for facility backup and diesel models for heavy-load operations. You'll find the power output, fuel type and phase configuration your equipment requires, with models from trusted manufacturers like Kohler, Deutz, Winco and Multiquip.
What to Expect From Intech's Generator Selection
Our generator inventory covers the specs that commercial contractors and industrial operations need. You'll find generators online in both portable gas and diesel configurations, with kilowatt ratings from 9.7kW to 45kW and voltage options to match your equipment. Our selection includes both single-phase and three-phase models.
- Power ranges for different applications: Portable generators in the 9kW to 16 kW range run power tools, lighting and smaller equipment on jobsites. Midrange units from 23kW to 45kW handle welders, compressors and multiple tools running simultaneously. Our industrial generators for sale provide the higher kilowatt output needed for facility backup power, HVAC systems and continuous operation in commercial settings.
- Phase and voltage options: We stock single-phase and three-phase generators to match different equipment requirements. Single-phase units deliver 120V or 240V for standard contractor tools and lighting systems. Three-phase generators supply 208V to 480V for industrial machinery, commercial HVAC systems and heavy equipment. Match the phase and voltage specifications to your equipment before ordering.
- Diesel and portable gas models: Diesel generators provide better fuel efficiency and durability for extended runtime and heavy daily use in commercial applications. Portable gas generators offer quick setup and easy refueling for jobsites where you need flexibility and mobility. We carry both fuel types so you can choose based on your specific application requirements and operational needs.
How Intech's Generators Support Your Daily Operations
We carry Kohler, Deutz, Winco and Multiquip generators because they perform consistently in demanding commercial environments. These brands deliver reliable output, weather-resistant construction and the durability to handle frequent transport and jobsite conditions. You get equipment that starts reliably, runs steadily under load and holds up to the wear of commercial use.
Beyond the initial purchase, our team provides ongoing technical support throughout your equipment's service life. We employ former spray foam contractors and equipment specialists who understand the practical demands of your work and can answer questions about specifications, applications and performance. When you need parts or technical guidance, you're working with people who have hands-on experience with commercial power equipment.
Order Generators Online With Expert Support
Browse our complete selection of generators for sale online, or contact Intech Equipment for technical guidance on power requirements and equipment specifications. We've served commercial contractors and industrial operations since 1995.