PRODUCT DESCRIPTION

Probler P2 Gun Kit GCP2RA for Spray Foam and Coatings

For a Probler P2 set up that can handle both spray foam and coatings applications, the GCP2RA is a great solution! If you work frequently has you doing both insulation and coating jobs, the versatile Probler P2 bring many industry leading features to the table – And is backed by Graco technology and support. Intech Equipment and Supply has the full line up, replacement parts and more, right here at your fingertips!

The Probler P2 gun combines both form and function – usability is comfortable with the light weight of the Probler P2, and the long list of chamber and tip combinations make this a one stop shop solution. The GCP2RA comes with the GC250A mixing chamber and the Graco GC251A mix chamber insert. For foam insulation, spray a 5 inch pattern at 3 pounds per minute. For coatings applications, spray .4GPM with this Probler P2 set up.

When you select the Probler P2 GCP2RA package – you are demanding less and easier maintenance, and getting a piece of equipment that can get you into even tough to reach spots. The built in trigger force combined with the anti-crossover design makes this the gun to use to maximize your spray time. Equipment for spray foam and plural component coatings will undoubtedly take a beating, and with the Probler P2 you are getting built in protection on your investment.

GCP2RA Features:

• Easier to handle, The Probler P2 weighs only 3 pound
• Check valves to separate liquid and dry sides of the spray gun
• Responsive trigger action
• Mix chamber insert that is easy to reach and replace
• Anti – Crossover – keep material out of the air piston
• Comfortable handle, balanced design

GCP2RA Materials:

• Adhesives
• Polyurethane
• Roof Coatings
• Polyurea
• Polyurethane Coatings

GCP2RA Applications:

• Roof Coatings
• Pipe and Tank Coating
• Secondary Containment Spill Prevention
• Truck Bedliners
• Waterproofing
• Roof and Wall Insulation

Specifications:

• Max. Output – 40 lb/min (18 kg/min)
• Min. Output - 3 lb/min (1.4 kg/min)
• Weight - 3.0 lb (1.4 kg)
• Max. Working Air Inlet Pressure - 110 psi (7.6 bar, 0.76 Mpa)
• Max. Fluid Temperature - 200°F (93°C)
• Gun Dimensions - 6.9 x 8.7 x 3.5 in (17.5 x 22 x 8.9 cm)

Operation Manual: 313213
Brochure: 300615

GCP2RA -  GC250A w/ GC251A 5 in (127 mm) 0.4 gpm 3 lb/min