PRODUCT DESCRIPTION

High Output Transfer of Foam and Coatings Chemical Systems

Made in the USA, the lower-height higher output P-52 can transfer 10 gallons per minute in continuous service.

• Fits in standard 7’ high trailers – lower height
• Made in the USA
• High Output 10 gpm – doubling competitive brands
• Same spare parts as the GHO and IPM OP232C
• Stainless Steel Construction
• Wetted and Divorced Fluid Section – lowers are exposed to chemicals
• Outperforms regular feed pumps – made polyurethane chemicals

The robust design of the GHO returns improved in the P-52; a reliable, stainless steel, high output pump that fits inside a standard 7’ high trailer. The 10 gallons per minute continuous duty flow rate of the P-52 ensures that every proportioner is supplied with incoming material to fit its capacity.

• Pressure Ratio: 2.2:1
• Output: 10 GPM (37.85 LPM)
• Cycles per Gallon: 3.79
• Cycles per Liter: 7
• Stroke Length:4″ (10.2 cm)
• Maximum Air Pressure: 120 psi (8.273 bar)
• Air Inlet: 1/4 NPT (F)
• Fluid Output: 3/4 NPT (F)
• Air Consumption: 2.2 CFM per gal @ 100 PSI (275 cc/s per liter @ 7 bar)
• Weight:25 lbs (11.4 kg)